Home  /  Licences and contracts

Do fencing contractors need a licence in Victoria and NSW?

The regulator pages we found do not say whether farm, stock, vineyard or exclusion fencing needs a licence. This page reports what the NSW and Victorian pages do say, as thresholds, and what to ask before you sign.

What the regulator pages do not say

The regulator pages we found do not say whether farm, stock, vineyard or exclusion fencing needs a licence or registration, on either side of the Murray. The New South Wales fencing page describes fencing around residential property boundary lines. The Victorian registration page names, among its single-trade exceptions, only a chain wire fence around a tennis court. We do not infer anything from either. This page reports what each says, states the thresholds as thresholds, and ends with questions to put to a contractor.

Licensing depends on the value and type of work. Ask the contractor which licence or registration they hold, check it with the regulator for the side of the Murray where the fence is, and ask the regulator if you are unsure. A licence or registration is about the person doing the work. A planning or building permit is about the fence, and is covered further down.

New South Wales side of the Murray: what the NSW pages say

The NSW Government's fencing work page, run by Building Commission NSW, says "Fencing means putting up fences and gates within or on residential property boundary lines", and treats fencing as trade work (NSW fencing work page). It says some other licence categories "cover some fencing". It does not mention rural fencing and does not list exclusions, and we do not say what it implies. For the threshold it says: "You must have a contractor licence to carry out, advertise or contract for building or trade work that is valued at more than $5,000 in labour and materials (including GST)." Where a licence is needed and not held, it says you can be fined $22,000 as an individual or $110,000 as a company.

The general building work page repeats the $5,000 threshold and the penalty, under the Home Building Act 1989 per the page, and does not mention fencing (general building work page). Building Commission NSW is on 13 27 00, Monday to Friday 8:30am to 5pm. These are thresholds. They matter if the work counts as residential building work (the pages do not say whether a rural fence does).

Victorian side of the Murray: what the Victorian pages say

Consumer Affairs Victoria says registration with the Building and Plumbing Commission is needed for domestic building work where the contract is worth more than $10,000 (becoming a registered building practitioner). The single-trade exceptions the page lists name only one fence: "erecting a chain wire fence around a tennis court". Whether a rural boundary, stock, vineyard or exclusion fence counts as domestic building work, the pages do not say. Another Consumer Affairs Victoria page lists "fencing and gates" among small home improvement projects where you should check a tradesperson's credentials before hiring (builders and tradespeople page).

The Building and Plumbing Commission's page on unregistered practitioners mentions the $10,000 test for builders carrying out work that requires a major domestic building contract, and does not mention fencing (unregistered practitioner page). Its Home Warranty page says the scheme applies to eligible domestic building contracts signed on or after 1 July 2026, for eligible projects valued at more than $20,000, with the registered builder paying the premium (Home Warranty page). It does not mention fencing.

Materials ready beside a fence line: galvanised wire in a coil, steel star posts bundled together, treated pine strainer posts, a tape measure, and a clipboard with a blank sheet hanging from a gate post
Mildura district. Materials and a blank clipboard: the questions come before the signature

The thresholds in one table

Each row applies if the work counts as residential building work (New South Wales) or domestic building work (Victoria), and the pages do not say whether a rural fence does.

Side of the MurrayThreshold or rule as the page states itWhat the page says about fencing
New South Wales sideContractor licence for building or trade work valued at more than $5,000, including GST. Fines where a licence is needed: $22,000 as an individual, $110,000 as a company.Fencing page: residential property boundary lines. Silent on rural fencing.
New South Wales sideWritten contract over $5,000 including GST (NSW contracts page).Does not mention fencing.
New South Wales sideResidential building work from $5,000 to $20,000: a small jobs contract.Does not mention fencing.
New South Wales sideOver $20,000: an extensive contract and a Home Building Compensation certificate. Maximum deposit 10 per cent.Does not mention fencing.
Victorian sideRegistration for domestic building work where the contract is worth more than $10,000.Single-trade exceptions name only a chain wire fence around a tennis court.
Victorian sideHome Warranty for eligible contracts signed on or after 1 July 2026, projects valued at more than $20,000.Does not mention fencing.
The pages give thresholds. They do not say whether a rural fence is in scope.

Contractors who work across the border

Because Sunraysia straddles the Murray, a contractor may work on both sides. We describe the automatic mutual recognition scheme as mechanics only. For a New South Wales practitioner working in Victoria, the Building and Plumbing Commission says eligible practitioners must notify it with the online notification form before any work starts, that any condition on the home registration also applies, and that it is an offence to work as a building practitioner in Victoria without the required insurance (Victorian mutual recognition page). For a Victorian licensee working in New South Wales, the NSW Government says licensees must notify Building Commission NSW before they start, that home state licence conditions still apply, and that the scheme does not cover licences issued to companies or partnerships (NSW working interstate page). Neither page mentions fencing.

We do not say a Mildura contractor may work in Wentworth Shire or the reverse, and we do not say whether the scheme covers a rural fence. Ask the contractor what they hold, and ask the regulator on the side where the fence is.

Insurance, permits and what is separate

The only insurance facts in our sources are the Victorian required-insurance wording above, Victoria's Home Warranty and the New South Wales Home Building Compensation certificate. We give no view on cover. Ask what insurance the contractor holds and what it covers, and ask for the evidence in writing.

Permits are separate from licensing. Mildura Rural City Council lists "sheds, carports, verandahs, garages, fences" among building types that may need a building permit and says to check with its building department (Mildura building permits). Another Victorian council says a permit applies where a fence "is more than 2m high (regardless of materials used or location)" (another Victorian council's page). That is another council's rule, used only as an illustration, and we did not find Mildura's own height threshold. A fence that is also a pool barrier is a separate regulated fence. The Murray page covers flood and vegetation permits.

Questions to ask before you sign

  1. Which licence or registration do you hold? Ask for the name of the licence or registration and the body that issued it.
  2. For which side of the Murray? Check it with Building Commission NSW on 13 27 00 for New South Wales, or the Building and Plumbing Commission for Victoria.
  3. What insurance do you hold? And what does it cover on this job?
  4. Is the contract in writing? With the scope, the price basis and any deposit stated.
  5. Is the quote itemised? The cost and quote guide lists the items to look for.
  6. Who serves any neighbour notice? See the Victorian and New South Wales boundary fence pages, each for its own side.

When you are ready, send your town, the side of the Murray and a photo of the fence line, and the enquiry goes to a local contractor who is responsible for holding any licence or registration that applies.

What this page cannot do

This page cannot tell you whether a rural fence needs a licence or registration, which category covers it, or whether a rural fence counts as residential or domestic building work. The regulator pages we found do not say, and we have not guessed. Thresholds change, and the pages can be updated, so check the current figure with the regulator. We have not covered warranty periods or other contract thresholds, because we did not verify them. We are a referral service: we pass your enquiry to local contractors, who hold any licence or registration that applies and give any warranty in writing.

Written November 2026

Check the current rules before you rely on this

This page describes what the NSW and Victorian regulator pages say about fencing, licensing, registration and contracts, and where they stop. It describes the rules in general terms as they stood in November 2026. Standards, forms, thresholds and fines change.

The authoritative sources are NSW Government, fencing work (Building Commission NSW), NSW Government, general building work licence, Consumer Affairs Victoria, becoming a registered building practitioner, Consumer Affairs Victoria, builders, tradespeople and other building practitioners, Building and Plumbing Commission Victoria, home warranty insurance and NSW Government, building contracts and home building compensation. Where anything here differs from those sources, they are right and we are not.

We are not fencing contractors, builders, regulators or lawyers. For what applies to your fence, ask the contractor which licence or registration they hold, then ask the regulator for the side of the Murray where the fence is: Building Commission NSW (13 27 00) for New South Wales, the Building and Plumbing Commission for Victoria.

Accurate at the time of writing, November 2026. Always check the source before relying on it.

Questions

Common questions

Does a farm fence count as residential building work?

The pages we found do not say. The New South Wales fencing page describes fencing around residential property boundary lines, and the Victorian pages name only a chain wire fence around a tennis court as a fence. We do not infer anything. Ask the contractor, and ask the regulator on the side of the Murray where the fence is.

What is the New South Wales licence threshold for building or trade work?

The NSW Government's fencing work page says you must have a contractor licence for building or trade work valued at more than $5,000 in labour and materials, including GST. It does not say whether a rural fence counts. Building Commission NSW is on 13 27 00, Monday to Friday 8:30am to 5pm.

What is the penalty for building work without a licence in New South Wales?

Where a licence is needed and not held, the NSW Government pages say you can be fined $22,000 as an individual or $110,000 as a company. Whether a licence is needed for a rural fence is not something those pages say. Ask Building Commission NSW on 13 27 00.

What is the Victorian registration threshold?

Consumer Affairs Victoria says registration with the Building and Plumbing Commission is needed for domestic building work where the contract is worth more than $10,000. The pages do not say whether a rural fence counts as domestic building work. Ask the Building and Plumbing Commission.

Does Victorian Home Warranty cover fencing?

The Building and Plumbing Commission page says Home Warranty applies to eligible domestic building contracts signed on or after 1 July 2026, for eligible projects valued at more than $20,000, and does not mention fencing. We do not say whether it applies to a rural fence.

Can a Mildura contractor work in Wentworth Shire?

We do not say. Automatic mutual recognition requires a licensee working across the border to notify the other state's regulator before starting, and home state conditions still apply. The NSW page says the scheme does not cover licences issued to companies or partnerships. Ask the contractor and the regulator.

What contract do I need for a fencing job in New South Wales?

The NSW Government says a written contract is required over $5,000 including GST, a small jobs contract applies to residential building work from $5,000 to $20,000, and an extensive contract applies over $20,000, with a maximum deposit of 10 per cent. That applies if the work counts as residential building work. The page does not mention fencing.

How do I check a contractor's licence or registration?

Ask which licence or registration they hold, then check it with the regulator for the side of the Murray where the fence is: Building Commission NSW on 13 27 00 for New South Wales, or the Building and Plumbing Commission for Victoria. Ask for details in writing before you sign.

Next step

Send a photo of the fence line and a town

The town, which side of the Murray, the fence type, roughly how long it is and how it is reached. That is usually enough for a contractor to ask the right questions before a visit.